8
7
6
5
4
3
2
1
Installation and wiring
The V-RVC-PRO should be wired using good quality Cat5e or Cat6 cable. It is recommended to
Use TIA/EIA 568A cable wiring techniques. It is recommended to use shielded Cat5/6 cable
with cable runs over 100 feet in length or when connecting multiple V-RVC-PRO units. Shielded
cable is not mandatory however it may be necessary if EMI or RF interference is present at the
installation site. The V-RVC-PRO includes two RJ45 crimp-on connectors. Use a good quality RJ45
crimping tool to complete the connections.
Diagram B
www.factorelectronics.com
TIA/EIA 568A Wiring
Up to three V-RVC-PRO units can be daisy chained on one Cat5/6 wire and connected to one
Factor Electronics amplifier.
Diagram C
