Introduction
Congratulations and thank you for purchasing a Factor Electronics product. The
Factor Electronics V-RVC-PRO is an in-wall microphone and line level preamplifier
with separate volume controls for the inputs and a master volume control. The
master volume control provides remote volume control of all factor Electronics V-
Series commercial amplifiers.
The V-RVC-PRO allows Factor Electronics amplifiers to be expanded to suit the
customers needs. The V-RVC is very easy to install and operate. Please read this
entire manual to get the most from your V-RVC-PRO.
Unpacking
The V-RVC-PRO includes the following parts:
1 x V-RVC-PRO in-wall mic/line preamp
2 x Male RJ45 crimp on connectors
4 x Philips mounting Screws
2 x Keys
1 x V-RVC-PRO manual
Installation Using Factor Electronics Amplifiers
The V-RVC-PRO can be connected to any Factor Electronics amplifier by
connecting a cat5e or cat6 cable to the V-RVC RJ45 output jack, then connecting
the cat5e or cat6 cable to the V-RVC input provided on the back panel of all
Factor Electronics V-Series commercial amplifiers. Then connect the V-RVC
priority contacts to the remote mute contacts on the amplifier using a two
conductor wire.
Diagram A
www.factorelectronics.com
Note: Set the priority
switch to ON / Down
position.
Cat5/6 Out 1
Connect the priority
contacts on the V-RVC-
PRO to the remote mute
contacts on the amplifier
using a two conductor
wire
