Factair Safe-Air F8100, Руководство по эксплуатации

Страница: 4 / 38

3
Introduction
The F8100 Safe Air Monitor is designed to provide continuous monitoring of breathing-air and
compressed-air systems. Once set up the instrument will continue to monitor and data log the air
quality at user defined intervals, validating the air quality against a range of alternative international
standards. For breathing-air in the UK this ensures complete compliance with the relevant
requirements of COSHH L5.
The F8100, is designed primarily for use on airline systems up to 10 bar but can also test high pressure
cylinder charging systems when used in conjunction with the F3002 High Pressure Regulator.
The F8100 is supplied in a plastic protective case with storage provision for accessories.
The test is carried out using built in electrochemical cells for carbon monoxide and oxygen; infrared
LED sensor for the carbon dioxide and a Photo Ionisation Detector (PID) for Volatile Organic
Compounds. The moisture is measured with an electronic dewpoint meter and the instrument also
records pressure and ambient temperature. For measuring oil aerosols, Dräger Impactors are used in
the side mounted test port (or alternatively the Dräger oil chemical reagent tube). The Dräger
Impactors are supplied in packs of 10 and show the degree of oil contamination on the cut glass baffle
plate.
Calibration and Warranty
Safe-Air Monitors leave our factory with a 12-month warranty and calibration certificate. If the
instrument is returned to Factair for annual calibration, our standard turnaround is 10-15 working
days providing there is no major damage that requires an extensive rebuild. Note:- Please download
all stored data before returning the instrument to Factair.
Temperature Parameters
Storage: -10/+50°C
Operating Range: -5/+40°C
IMPORTANT – IT IS RECOMMENDED THAT YOUR SAFE-AIR MONITOR IS RECALIBRATED AND
SERVICED WITHIN 12 MONTHS FROM THE ISSUE DATE OF ITS CALIBRATION CERTIFICATE