21
Using the Dräger tube tip cutter
The F2187 Dräger Tube Tip Cutter is an optional extra not provided with the F8100 as standard and is
especially designed for cutting the ends of the tube. It has been designed to prevent glass from falling
out of the opener by accident. The reservoir for the broken-off tips is easy to empty.
1.
Place the end of the
tube between the 3
blades, and turn to
score the end.
2.
Push the tube at an
angle to break the tip.
3.
Repeat steps 1 and 2
with the other end of the
tube
Using the tube tip cutter with the Dräger oil tube
1. Using the Tube Tip Cutter,
place the ampoule section in the
platform at the bottom. Note:
Make sure the tube is against
the back wall of the cutter. Line
up the black dot nearest the end
of the tube with dot on the
cutter.
2.
With one hand holding the
cutter, the other holding the
tube and with your thumb
against the base of the
cutter, apply pressure to the
tube, this should break the
inner tube.
3.
Place your used detector
tubes in a safe container
until they can be disposed of
properly as “sharps” or glass.
Содержание Safe-Air F8100
