12
FITTING OF THE SECTIONS
1.
fix a connector on the top of all standard
sections.
Do not lock the screws.
2.
Put the wire into the top section
3.
Insert a black bearing
(Rep. B)
into the
bottom of the top section
Connect both sections (the bearing will be
pushed up and locked by the connector).
Tighten the 4 screws.
4.
insert a bearing
(Rep. B)
into the 2 M
section and connect it with another standard
section.
5.
Continue this operation for the next
sections. Do not forget to insert a bearing.
You must have:
a bearing always above
each connector.
6.
pass the forestay through the telescopic
section and the black feeder.
7.
on the last section, insert a bearing, this one
will be pushed up by the telescopic section.
8.
insert the telescopic section into the bottom
section.
Do not fit the screws yet.
