Page
10
with
28
Page
10
with
28
Page
10
with
28
Page
10
with
28
MANUAL - KRAMER BI-pulse MIG / MAG 200
active in the MAG CO
2
H
2
ABOUT
2
N
2
and NO, for the addition to argon or helium. The consumable electrode is in the
active in the MAG CO
2
H
2
ABOUT
2
N
2
and NO, for the addition to argon or helium. The consumable electrode is in the
active in the MAG CO
2
H
2
ABOUT
2
N
2
and NO, for the addition to argon or helium. The consumable electrode is in the
active in the MAG CO
2
H
2
ABOUT
2
N
2
and NO, for the addition to argon or helium. The consumable electrode is in the
active in the MAG CO
2
H
2
ABOUT
2
N
2
and NO, for the addition to argon or helium. The consumable electrode is in the
active in the MAG CO
2
H
2
ABOUT
2
N
2
and NO, for the addition to argon or helium. The consumable electrode is in the
active in the MAG CO
2
H
2
ABOUT
2
N
2
and NO, for the addition to argon or helium. The consumable electrode is in the
active in the MAG CO
2
H
2
ABOUT
2
N
2
and NO, for the addition to argon or helium. The consumable electrode is in the
active in the MAG CO
2
H
2
ABOUT
2
N
2
and NO, for the addition to argon or helium. The consumable electrode is in the
form of the solid wire, typically having a diameter of 0.6 to 1.2 mm and is fed continuously by a special supply system,
a speed of 2.5 m / min and above. The welding may be water-cooled or gas shielding. Welding is carried out mainly
constant current of positive polarity as a semi-automatic welding, mechanized, automated or robotic using specialized
equipment. Glowing shield arc between the consumable electrode and the weld material for forming the weld in a very
favorable thermal and chemical conditions. Welding of this type can be used to make high quality of the connections of
all the metals which may be joined by arc welding. Belong to them: carbon steels and low alloy steels and corrosion
resistant. Welding can be carried out in the workshop and field in all positions.
Figure 2.
MIG / MAG - scheme
Brazing MIG / MAG
Braze welding method of joining materials, a combination of two processes: brazing and MIG / MAG welding.
Similarly as during the soldering process braze there is no building-up edges of the metal. The preparation of the
material, the method of wire feed gas to protect the weld pool (usually pure argon) - are the hallmarks of which are
characteristic of the MIG / MAG welding. As additional material is most commonly used wire CuSi (CuSi3) elements
galvanized steel wire or SG-CuAl elements of aluzinc or aluminum.
Содержание KRAMER 200
Страница 1: ......
