Page
25
with
28
Page
25
with
28
Page
25
with
28
Page
25
with
28
MANUAL - KRAMER BI-pulse MIG / MAG 200
5. The warranty on goods sold
does not exclude, limit or suspend the
5. The warranty on goods sold
does not exclude, limit or suspend the
the buyer's rights resulting from the provisions of the warranty for defects in the goods sold.
6. disclosed defects during the warranty period will be removed in no more than 14 days from the date of delivery
of the faulty device to the Service Importer.
7. The advertised within the warranty of the machine should be delivered to the Seller with a full standard
equipment, clean and - if the device has - with a clear plate.
8. advertised device must be returned in the box properly packed protected against damage in transit needs to
be determined if required "up - down" or "caution glass"
9. The company skilled in the art does not accept complaints and returns sent to the address of the Company for
downloading!
10. The guarantee document is valid if you have correctly completed entries regarding: the date of sale, the
name of the device sold, stamp and signature of the seller and the customer acknowledges his signature.
11. The warranty does not cover the activities foreseen in the manual, the execution of which the user is obliged to
own and at their own expense, for example. Start-up, maintenance, replacement batteries, and other supplies.
12. Said faulty equipment and parts become the property of the Guarantor.
REFUSAL OF COMPLAINTS:
The guarantor may refuse to accept the complaint if:
•
statement using the unit misused and
instruction
operation,
•
delivery device dirty, no standard equipment, without the nameplate and seal or hologram
•
determine the cause of the fault other than manufacturing or material defect inherent in the device,
•
formal defects associated with the sales documents,
as unfilled card
Warranty, lack of proof of purchase.
ARE NOT COVERED BY WARRANTY:
1. The parts which, when aligned with the recommendations of operation are subject to wear and tear within the
warranty period, such as welding torches, the mass handles, nozzles, burners, batteries, belts, filters, oil,
electrodes, gaskets, o-rings, and other elements related to directly to the operation.
2. Disadvantages caused by mechanical damage, thermal or chemical plant and equipment.
3. Damage due to improper transport and storage,
4. Damage related to work at too low or too high a temperature,
5. Damage caused by faulty electrical installation, liquid or moisture electrical components water,
6. Wrong connection to a power source (eg. Poor polarity, poor connection 230 or 400 V, there are no phases or too
loosely clamped connection cables)
7. Damage caused by overloading equipment overheating,
8. Incorrect setting of the welding parameters, the interference in the control panel screw compressors.
Содержание KRAMER 200
Страница 1: ......
