Page
16
with
28
Page
16
with
28
Page
16
with
28
Page
16
with
28
MANUAL - KRAMER BI-pulse MIG / MAG 200
3. S4T
3. S4T
Czterotakt Special Mode -
when you press and release the button
on the torch gas flow is developed within
Czterotakt Special Mode -
when you press and release the button
on the torch gas flow is developed within
Czterotakt Special Mode -
when you press and release the button
on the torch gas flow is developed within
the set time (Preg), and TIG arc welding. The arc voltage on the grid will be increased by a value set by the
user (HoTI) and drops to a value substantially the welding current set time (slope). Arc will be maintained
until the next time you press and release the button. After his release will drop current (Slop) to the final
current (Endi) - filling the crater. Then terminate the arc and set time (Post) shielding gas will flow.
WELDING POINT - SPOT
In order to start spot welding SPOT select this option on the control panel, set the time before the shielding gas flow
(Preg), the duration of the weld (Sptt), the welding current and the gas flow after the expiry of the arc (Post). After
pressing device zajarzy and maintain the arc during the time set by the user, and then hang up automatically - without
releasing the button on the handle spawlaniczym.
If you use the CPOT (continuous spot welding) must also set the time intervals between the welds (Stop). After
pressing the button on the handle of the welding device will automatically control the duration of the gap between the
seal and the welds until the button is released. In this way, a series of welds can be made without the need to
constantly pressing and releasing a button on the torch.
Содержание KRAMER 200
Страница 1: ......
