background image

1

1

SUMMARY OF WARNINGS

This list summarises critical WARNINGS in this manual. They are

repeated here to let you know how important they are. Study

these WARNINGS carefiully; they can save your life and the lives

of people with whom you work.

WHEN OPERATING THE SPIDER IN RAISED POSITION

(OUTRIGGERS FULLY EXTENDED) THE OUTRIGGERS

MUST BE PLACED IN STANDARD POSITION, SEE FIG.

FAILURE TO DO SO CAN COURSE INJURY OR DEATH.

DO NOT USE THE PLATFORM WITHOUT READING AND

FOLLOWING THE INSTRUCTIONS CAREFULLY. FAILURE

TO COMPLY WITH CORRECT OPERATING PROCEDURES

AND SAFETY INSTRUCTION, CAN BE A CAUSE FOR

INJURY OR DEATH.

DO NOT ATTEMPT TO OPEN ANY BOXES CONTAINING

ELECTRICAL COMPONENTS, WHEN POWER IS

CONNECTED TO THE MACHINE. POWER SUPPLY IS 230

VOLTS AND CAN CAUSE INJURY OR DEATH. BEFORE

OPENING THE BOXES WITH ELECTRICAL

COMPONENTS, 230 VOLT MUST BE DISCONNECTED

FROM THE MACHINE. REPAIR WORK WITH 24VDC

POWER CONNECTED SHALL ONLY BE PERFORMED BY

AUTHORISED PERSONNEL.

WHEN THE PLATFORM IS IN THE STOWED POSITION

OR THE OUTRIGGERS DO NOT HAVE A LOAD ON

THEM, THE RED INDICATOR LIGHTS ON THE

OUTRIGGERS SHALL BE ON. IF THEY ARE NOT ON

THE SAFETY SYSTEM HAS MALFUNCTIONED.

DO NOT USE THE PLATFORM IF THE RED LIGHTS

ARE OUT UNDER THESE CIRCUMSTANCES.

FAILURE IN THE SAFETY SYSTEM CAN CAUSE

INJURY OR DEATH. CALL AUTHORISED SERVICE

CENTRE IMMEDIATELY.

WHEN THE SPIDER IS USED FOR WELDING WORK THE

SPIDER HAS TO BE UNPLUGGED AND THE

OUTRIGGERS HAVE TO BE PLACED ON RUBBER MATS.

IF A CHAIN SHOULD BREAK, THE PLATFORM SHOULD

BE BROUGHT TO THE GROUND IMMEDIATELY. TO

CONTINUE OPERATING THE PLATFORM WITH A

BROKEN CHAIN, CAN CAUSE INJURY OR DEATH.

CALL AUTHORISED SERVICE CENTRE IMMEDIATELY.

DO NOT ATTEMPT TO USE THE PLATFORM IF RED LIGHTS

ON THE OUTRIGGERS ARE NOT ON, WHEN OUTRIGGERS

ARE IN THE STOWED POSITION. IF THE RED LIGHTS ARE

OUT WHEN OUTRIGGERS ARE LIFTED OFF THE GROUND,

IT IS AN INDICATION THAT THE SAFETY SYSTEM – “CUT-

OUT” SYSTEM – IS NOT WORKING PROPERLY. FAILURE IN

THE SAFETY SYSTEM CAN CAUSE INJURY OR DEATH.

CALL AUTHORISED SERVICE CENTRE IMMEDIATELY.

IF BASE OF OUTRIGGER IS NOT LOCKED TO THE FRAME

OF THE PLATFORM, OUTRIGGERS CAN TURN

RESULTING IN INSTABILITY CAUSING INJURY OR DEATH.

LOCKING PIN FOR SECURING THE BASE OF THE

OUTRIGGER TO THE FRAME OF THE PLATFORM MUST

ALWAYS BE IN POSITION BEFORE ATTEMPTING TO

LIFT THE PLATFORM OFF THE GROUND.

IF THE FOOTPLATES ARE NOT MOUNTED AND SECURED

PROPERLY ON THE OUTRIGGERS, THE PLATFORM IS

NOT SECURED AGAINST MOVING ON THE OUTRIGGERS

WHICH CAN CAUSE INJURY OR DEATH.

FOOTPLATES MUST ALWAYS BE MOUNTED ON THE

OUTRIGGER AND SECURED BEFORE ATTEMPTING TO

LIFT THE PLATFORM OFF THE GROUND.

Содержание spider ts26













Отзывы: