Fac F300 VO L, Руководство по эксплуатации и обслуживанию

Страница: 10 / 68

10
XXXXX
Fig. 2
IT
EN
NAMEPLATES - CONFORMITY MARKINGS
The device described in this manual is
produced in accordance with the directives
in force, as amended. All component parts
are adapted to the requirements of the
Directive and the CE mark testifiying the
compliance.
The plate with the identification of the
manufacturer, the technical machine and
the CE marking is located on the base of
the slicer (figura 2).
The plate must never be re-
moved and must always be
legible.
In case of wear or dama-
ge the user is required to
replace it.
SUPPLIED ACCESSORIES
Unless otherwise defined at the
moment of order, the machines are
supplied together with the following:
• EU conformity declaration;
• instructions manual for installation,
use and maintenance.