41. Mark and cut the rear lower shock mounts as shown in
the photos below. Locate FT50325BK / FT50326BK Lower
Shock Mounts & supplied 9/16” x 4 1/4” bolts. Attach
the new mounts with the 9/16” hardware to ensure that
the factory mount has been trimmed enough. Remove
the bracket & sand / grind off the rest of the weld and cut
areas smooth to the frame. Drill out the two factory holes
out to 7/16”. Paint all bare metal areas.
SEE FIGURES 79-89.
FIGURE 76
FIGURE 77
FIGURE 78
FIGURE 79
FIGURE 80
FIGURE 81
DO NOT CUT OR REMOVE THE INNER MOUNT
DO NOT CUT OR REMOVE THE INNER MOUNT
20 of 31
