47. Locate the factory tie rod. Trim 1’’ off the end.
SEE FIGURES 49
48. Locate the Fabtech tie rod end (FT20277). Install the tie
rod end on the tie rod.
SEE FIGURE 50
49. Reconnect the tie rod end to the steering knuckle and
torque to 60 ft-lbs.
SEE FIGURE 51
50. Using the supplied 7/16” hardware install the factory
sway bar to the frame using the FT30591 (driver side
bracket) and the FT30590 (passenger side bracket). When
mounting, the sway bar will be offset towards the rear
of the truck and the flat side towards the outside.
SEE
FIGURES 52-53
51. Install the sway bar end to the factory lower control arm
using the factory end links.
SEE FIGURE 54
13 of 16
FIGURE 49 - STEP 47
FIGURE 50 - STEP 50
FIGURE 51 - STEP 49
FIGURE 52 - STEP 50
FIGURE 53 - STEP 50
FIGURE 54 - STEP 51
