FAAST 8251BPI and 8100
INSTALLATION AND MAINTENANCE INSTRUCTIONS
1
TABLE OF CONTENTS
Document Colour Code Key:
(refer to Page 24)
Black:
applies to both 8251BPI and 8100 Devices
Orange: applies to 8251BPI FAAST XM Only
Green: applies to 8100 FAAST XM Only
SPECIFICATIONS:
Electrical Characteristics
External Supply Voltage
18
– 30V
DC
Remote Reset Time
External monitor must be pulled low for a minimum of 100msec.
Power Reset
10 secs (FAAST 8251BPI)
;
1 sec (FAAST 8100)
Average Operating Current
500mA @ 24V
DC
Alarm Current
650mA
– All relays active, all alarm levels displayed. Voltage @
24V
DC
Average Loop Driver Operating Current:
700uA
Loop Driver Voltage Range:
15
– 32V
DC
Relay Contact Ratings
3.0A @ 30V
DC
, 0.5A @ 125V
AC
Environmental Ratings
Operating Temperature
0°C to 38°C
(32°F to 100°F)
Sampled Air Temperature
-20°C to 60°C
(-4°F to 140°F)
Humidity
10 to 95% (non-condensing)
IP Rating
IP30
Coverage Area
1000
m
2
(8,000ft
2
)
Air Movement
0 - 1,219.2 m/min.
(0
– 4,000 ft./min.)
Mechanical Characteristics
Exterior Dimensions
337 x 330 x 127
H x W x Dmm
Cable Access
4 x 25.4mm cable entry holes on top and bottom of unit.
Wire Gauge
2.0mm (12 AWG) max to 0.5mm (24 AWG) min.
Shipping Weight
5.26 kg, includes packing material
Nett Weight
Pipe Network Size
Up to 1000m
2
Maximum single pipe length
80m
External pipe diameter
25mm
Internal pipe diameter
15 - 21mm
Specifications:
…………………………………………1
Introduction
:……………………………………………2
S
cope of this Manual……………………………….2
Description
:………………………………………….…2
Features……………..………………………………2
Items Included with Unit.........……………………. 2
Installation
:.………………………………………….... 2
Pipe Installation..…..………………………………. 2
Physical Unit Installation........…………………..... 2
Securing the Mounting Bracket……………….2
Mounting the
Detector to the Bracket……….. 3
Connecting the Air Sampling Pipe..…………. 3
Exhaust Pipe……………..……………………. 3
Wiring
........……………………………………...….. 3
Power Cables…………………………….……. 3
Conduit Usage…………………………………. 3
FAAST 8251BPI Cabling Requirements……....... 4
FAAST 8251BPI System Powering…….……..….4
FAAST 8100 Cabling Requirements…….………. 5
FAAST 8100 System Powering …………….…. 5
User Interface:.…..………………………………….... 6
FAAST 8251BPI User Interface……….…………. 6
FAAST 8100 User Interface……………………….6
User Interface
Card Installation……………....….. 6
Particulate Level Display…………………..…....... 6
Alarm Level
Display ……………………..……..….7
Alarm Level Programmable Ranges……..…. 7
Air Flow / Fault Display……..…………..……..…. 7
Labels………………………………..…………. 7
User Interface
Buttons….………………………….7
Modes of Operation:……..………….…………….... 8
Initialisation…………………………...….………….8
Startup……………………………………………….8
Configuration…………………………………....…. 8
Normal Mode………………………………..….......8
Test Mode………………….……………..……..…. 8
Reset Mode…………..……………...….…………. 8
Acclimate…………………………………………….9
Setting Acclimate Mode………………………. 9
Day, Night and Weekend Mode……………....…..9
Isolate………………………………………..…....... 9
Disable………….………….……………..……..…. 9
User
Button Alternate Functions…..…………….10
Passcode
Access……………….…………….10
Address Blink Mode….……………………….10
IP Address Blink Mode……………………….11
Real-
Time Clock..…..………………………..……11
Logs
........………………………………………......11
Event Log…………………………………..…. 11
Data Trend Log…………….……………….... 11
Message
Log…………………………………. 11
External Monitor / Reset
…………………...….. 11
Ethernet Connection………………………....... 11
Faults…….…………………………………...…. 12
Pipe Network.…………………………………..… 13
Web Server………………………………….….… 13
Email Notification…….………………………..…. 13
Canned Smoke Te
sts……………………………. 13
Maintenance……………...............................….. 13
FAAST XM Detector Base……..…………....….. 13
Glossary:…………………..………….……………....14
Key Terms………………………...….……..……. 14
Document Colour Code Key………………….. 14
FAAST System Validation Form
….…………….... 15
