![background image](http://html1.mh-extra.com/html/faac/tm2-ppr/tm2-ppr_manual_3126113022.webp)
MEMORISING THE FIRST REMOTE CONTROL
This can only be carried out when the motor is new, or after the memory has been
completely erased.
T1: First remote control to be memorised
Only switch power on to one motor at a time when doing this.
Each time the motor is switched on, you have up to 3 hours in which to memorise
the first remote control. Once this time has elapsed, it is no longer possible to
memorise the remote control. To reset the timer of the function, simply switch
the motor off and on again.
AUTOMATIC DISABLE FUNCTION
FIRST REMOTE CONTROL MEMORISATION
T1
T1
T1 (2 sec)
+
A
B
B
B
OPERATING MODE
The motor is simple to install and easy to use, it does not need to be adjusted as
it automatically recognises the limit stops.
The roller shutter must be fitted with:
A - Rigid straps or anti-burglary springs
B - Fixed or removable safety plugs in the guides
It is recommended that you always check the strength of the shutter.
A
B
N.B. until the remote control has been
memorised, the wired control of the
motor will operate in “dead-man” mode.
TM2
PPR
22
A4518_6G85_Rev.A
EN