![background image](http://html1.mh-extra.com/html/faac/tm2-ppr/tm2-ppr_manual_3126113018.webp)
ELECTRICAL CONNECTIONS
- To avoid safety hazards or malfunctions, electrical control devices connected
to the motor must be rated according to the characteristics of the motor.
- Disconnect devices must be installed in the mains power supply line in accord-
ance with national installation regulations.
- If used outdoors, use a H05RN-F power cable with a minimum carbon content
of 2%.
- If the white or black wire is not used, it must always be insulated. It is dangerous
to touch the white or black wire when the motor is powered.
optional button*
brown
blue
yellow - green
*
The installation of the button is optional; the connection can be made either with
the phase (brown wire) or with the neutral (blue wire). The button can be used to
control the motor in step-by-step mode (up, stop, down, stop ...).
white or
black
TM2
PPR
18
A4518_6G85_Rev.A
EN