![background image](http://html1.mh-extra.com/html/faac/tas250/tas250_installation-manual_3110683008.webp)
UL Compliance for the TAS250-125US and the TAS250-125CDN Models only
The FAAC Telephone Access System (TAS250) complies with the UL 294 which is described by the following: UL
Standard for Access Control Equipment, USA. The TAS250 enables users to grant access to the building, to their
visitors, via their own telephone line or cellular telephone. The TAS250 also supports basic schedule operations for
the postal lock supervision and automatic relay activation.
•
The TAS250 can be connected to the PC via IP or RS-485 or internal PTSN to the phone line, these are all
supplementary. The TAS250 must be connected to one of the compatible controllers (KT-300, or KT-400).
•
Use only a UL listed transformer available through FAAC distributors or dealers, please refer to the
Technical Support contact information to obtain the specific transformer, see page 2.
•
FAAC part number TR1640P/UL
(manufacturer part number Codex model SEP-1640U)
•
FAAC part number TR1640P/CSA
(manufacturer part number Codex model SEP/G-1640)
•
For UL 294:
•
Only models TAS250-125US (for installation in the USA) and TAS250-125CDN (for installation in
Canada) are UL listed.
•
If the TAS250 door lock output is used in fail-secure mode, a listed panic hardware device shall be used
to allow emergency exit from the protected area.
•
Electrical specifications, refer to
Table 1 on page 15
and
Table 2 on page 16
.
•
For class 1 installation, the optional camera need to be installed.
•
Each TAS250 will be battery backed up with a KT-BATT-12, 12V/7Ah battery.
•
The optional accessories allowed in a UL installation are:
•
Heater kit (part number TAS250-HEAT)
•
Postal lock (part number TAS250-POSTAL)
•
Color camera (part number TAS250-CAM-N)
•
The TAS250 is an access control accessory.
•
Humidity test conducted at 90%.
•
Compatible card readers are: P225, P325, P600 and Polaris.
•
The TAS250 has an on-board capability of monitoring 4 input points. Each onboard input is supervised with
or without end-of-line resistors (5.6K ohm). The maximum distance of one line is 600 m (2,000 ft) with
AWG #22 in a single or double EOL configuration.
4
Содержание TAS250
