![background image](http://html1.mh-extra.com/html/faac/tas250/tas250_installation-manual_3110683031.webp)
7 - Hardware Default initialization
Note:
The Soft Reset and the Hard Reset can be performed directly from the VUI, without having to open the TAS250,
refer to the
TAS250 Programming Manual
.
7.1 How to reset the FAAC Telephone Access System for Factory
Default
Before you start, you must be able to:
•
Open the TAS250 with the key.
•
Locate the reset button (SW1) and the two jumpers JP1 - JP2.
•
See the flashing blue
Heartbeat
LED.
1.
Remove JP1 and JP2 jumpers as described in Table 4 for Factory Default
.
2. Press the reset button.
3. Check the blue
Heartbeat
LED pattern, wait until the heartbeat pattern corresponds to this:
Continuous LONG pulses
4. Put back JP1 and JP2 jumpers, close and lock the TAS250.
5. Configure the TAS250 with the VUI, refer to the
TAS250 Programming Manual
, DN1770.
Figure 12: TAS250 Factory Default Steps
27
Содержание TAS250
