![background image](http://html1.mh-extra.com/html/faac/tas250/tas250_installation-manual_3110683030.webp)
6 - Heartbeat Patterns
The TAS250 status can be obtained from the
HEARTBEAT
blue LED patterns. It is located near the ribbon cable
connected to the door PCB, see
Figure 8:
. This information is particularly useful when connecting the TAS250 to the
EntraPass system. The following table lists all conditions along with a brief description. Refer to
Table 4
, if you
must reset or change the communication mode with the TAS250.
Table 6: Heartbeat Patterns
Booting Up
Steady
Factory Default
Continuous LONG pulses
Forced Default Static
3 Long Pulses
Modem Initialization
Single 2.5 Sec. Burst
Dialup Communication
with EntraPass
Corporate Gateway
Communication with
EntraPass
Hard Reset
2 Short Pulses
3 Short Pulses
4 Short Pulses
Fail Soft
Continuous Short Pulses
Quick Pulses
Firmware Update
5 pulses per sec.
@ 50% duty cycle
Very Quick Pulses
Rebooting
10 pulses per sec.
@ 50% duty cycle
26
Содержание TAS250
