![background image](http://html1.mh-extra.com/html/faac/s700h-sb/s700h-sb_user-manual_3139604006.webp)
a
a
ENGLISH
6
2) Determine the position of the guide bracket on the support
bracket, referring to the leaf rotation axis, as shown in Fig. 15.
3) Accurately weld the guide bracket on the support bracket as
shown in Fig. 15, so that the mid-points of the two brackets are
aligned with each other.
LEAF ROTATION AXIS
Fig.15
4) Insert the gate in the guide bracket and hinge it.
5) Close the guide bracket, from the pilaster side, welding a plate
as shown in Fig. 15 ref.
a
.
6) Manually check if the gate is free to open and close completely,
stopping on the travel-limit mechanical stops, if supplied, and if
leaf movement is smooth and friction- free.
MID-POINT
5.3.2 OPERATOR CBAC-SB WITH MECHANICAL RELEASE
Fig.12
2) Accurately weld the bush on the profile (Fig.12) so that the
notch on the bush corresponds to the profile mid-point, as shown
in Fig. 11.
3) Fit the guide bracket on the bearing case.
Fig.13
To avoid compromising good operation of the
automated system, do not, on any account, weld
the gate leaf on the guide bracket or on the support
bracket.
4) Insert the gate in the guide bracket and hinge it.
5) Close the guide bracket, from the pilaster side, welding a plate
as shown in Fig. 10 ref.
a
.
6) Manually check if the gate is free to open and close completely,
stopping on the travel-limit mechanical stops, if supplied, and if
leaf movement is smooth and friction- free.
GUIDE
BRACKET
SUPPORT BRACKET
LEAF ROTATION AXIS
Fig.11
1) Insert the support bracket (Fig.1 ref.
n
) on the bearing case.
Fig.14
GUIDE BRACKET
MID-POINT
LEAF ROTATION AXIS
SUPPORT
BRACKET
GUIDE
BRACKET
SUPPORT BRACKET
NOTCH
TYPE
TYPE