![background image](http://html1.mh-extra.com/html/faac/e850s/e850s_instructions-manual_3122744015.webp)
Kit E850S
15
532181 - Rev.A
46
A
47
48
49
50
3 - CL -
4 -R.CL -
1 -R.OP -
2 -OP -
Tr
ansla
tion of the original instruc
tions
ENGLISH
5.2
LIMIT SWITCH ADJUSTMENT
C850 must be released.
The deceleration starting points and stop points are set by adjusting
the integrated limit switches. The maximum deceleration space
that can be set is 5 m. The minimum deceleration space depends
on the programmed speed (parameters
L.
and
.L
):
7
Minimum deceleration spaces
L0
minimum distance from the stop point: 10 cm
L1
minimum distance from the stop point: 40 cm
L2
minimum distance from the stop point: 70 cm
L3
minimum distance from the stop point: 130 cm
!
Failure to comply with the minimum distances indicated in
7
can
jeopardise the integrity and operation of the C850 and be a potential
safety hazard.
Loosen the central screw of the limit switch unit by one turn (
46
).
OPENING TO THE LEFT
8
Opening to the left
function
cam to be adjusted
direction of
adjustment
closing
cam 3
closing deceleration
cam 4
opening deceleration
cam 1
opening
cam 2
1. Close the gate as far as the required closed position. The closed
position must be at least 10 cm from the external mechanical stop.
2. Using a screwdriver, turn screw number 3 anticlockwise until the
cam engages the micro switch, as shown in
47
. When
the
micro switch is activated, the LED DL6 (CL) turns off.
3. Open the gate as far as the closing deceleration starting point.
4. Using a screwdriver, turn screw number 4 anticlockwise until the
cam engages the micro switch as shown in
48
When
the
micro switch is activated, the LED DL8 (R.CL) turns off.
5. Open the gate as far as the required opening deceleration starting
point.
6. Using a screwdriver, turn screw number 1 clockwise until the cam
engages the micro switch, as shown in
49
. When the micro
switch is activated, the LED DL7 (R.OP) turns off.
7. Open the gate as far as the required open position. The open
position must be at least 10 cm from the external mechanical stop.
8. Using a screwdriver, turn screw number 2 clockwise until the cam
engages the micro switch, as shown in
50
. When the micro
switch is activated, the LED DL5 (OP) turns off.
Содержание E850S
Страница 1: ...Kit E850S Translation of the original instructions...
Страница 19: ......