FAAC E700, Руководство пользователя, Страница: 3 / 12

306
64
130
225
Fig. 2
Fig. 6
Fig. 1
Fig. 3
Fig. 4
Fig. 5
230V -> 2,5A - 250V
115V -> 4A - 120V
1 BOX LAYOUT
Fig. 2 shows the four 5 mm diam. holes for securing the box
(ref.
) to the wall, the three fittings M16/M20/M25 for installing
the cable grippers (ref. ) and the two lid hinges (ref. ).
The box contains the E700 electronic unit and the devices
to power it. It must therefore be handled with care during all
installation stages, to avoid damaging its components.
The dimensions of the box are shown in Fig.1:
The lid hinges can be moved upward to allow opening the box
housing (Fig. 3); they can also be removed and re-positioned
in order to enable the lid to open to the right or left.
When you have secured the box in the selected position, cover
the securing holes (ref.
Fig.2) and the screws with the supplied
plugs as shown in Fig.4.
After you have finished the operations to connect the control
board with the various parts of the automated system, close
the box, positioning the lid in its seat with seal.
Connect the supply as shown in Fig. 5.
Dimensions in mm
ELECTRICAL BOX E700
Next, tighten the four supplied screws to guarantee the degree
of protection against external agents (Fig.6).
ENGLISH
2