FAAC E1SL, Руководство пользователя, Страница: 30 / 52

23
E1SL 30 532258 04 - Rev. B
ID3
E1SL
S2
S4
S1
S3
INTERLOCK
A
B
E1SL
ID1
SDK EVO
ID3
E1SL
S4
S1
INTERLOCK
A
B
E1SL
ID1
SDK EVO
pA
pB
Tr
ansla
tion of the original instruc
tions
ENGLISH
INTERLOCK WITH NO MEMORY: OPEN SENSORS inside and outside on access A and
also on access B.
Internal
External
INTERLOCK WITH MEMORY: access A with an OPEN SENSOR on the outside, access B
with an OPEN SENSOR on the inside.
Internal
External
pA
,
pB
OPEN button access A, access B
S1 S2 S3 S4
accesses A and B
closed
opens A opens A opens B opens B
access A not closed
access B closed
opens A opens A
O P E N B re -
quested O P E N B re -
quested
access A closed
access B not closed
O P E N A re -
quested O P E N A re -
quested
opens B opens B
S1,S2,S3,S4 one-direction radar detectors
S1 S4 pA pB
accesses A and B closed
opens A then B* opens B then A* opens A opens B
access A not closed
access B closed opens A then B* OPEN-requested
B then A*
---- ----
access A closed
access B not closed OPEN-requested
A then B* opens B then A* ---- ----
* automatic opening after the first access has closed
S1,S4 one-direction radar detectors
9.1 INTERLOCK
INTERLOCK allows 2 interlocked accesses to be created: the opening
of one access is subject to the closing of the other and vice versa.
-
Both accesses must be closed in order for a detector or button to
OPEN the access. If this condition is not met, the OPEN com-
mand is not executed and an "OPEN-request” is generated. The
"OPEN-request” it is carried out as soon as both accesses are
closed again.
Use one-direction radar detectors (see relative section).
 
INTERLOCK is not available on E1RD boards.
INTERLOCK can be with or without memory:
■
INTERLOCK WITH NO MEMORY
OPEN detectors must be installed both outside and inside each
access. The opening is always controlled by the detectors and it is
opened only if both accesses are closed.
■
INTERLOCK WITH MEMORY
The detector that opens the first access generates the command to
open the second access automatically. This command remains in
memory to be carried out after the first access has closed.
Set INTERLOCK with memory when OPEN detectors are NOT installed
in the area between the two accesses (even if OPEN BUTTONS are
installed to prevent entrapment).
INSTALLING INTERLOCK
INTERLOCK can only be programmed between nodes ID1 and ID3.
1. With both boards switched off, connect the boards together
(connectors J18) via 3 wires in a cascade configuration, then turn
power on to the boards.
2. Connect the SDK EVO to the first board, assign the ID, then enable
INTERLOCK.
-

/ PROGRAMMING /INTERCOM…
… ID = 1 ( MASTER )
…INTERLOCK WITH MEMORY or NO MEMORY (associated ID )
3. Connect the SDK EVO to the second board and carry out the opera-
tions as in step 2, assigning ID 3 .
Program any other NODES in INTERCOM.
4. Register all the network IDs using the MASTER :
-

/ PROGRAMMING /INTERCOM/ NODES ENTRY
When finished, NODE LIST appears. Make sure that all the nodes
have been registered.
5. Press ESC repeatedly until you return to the main menu.
ENABLING / DISABLING INTERLOCK
Activate the appropriate input command configured on the MASTER ,
or via the SDK EVO connected to the MASTER :

/ MODFUN press

or until (INTERLOCK active) appears.