![background image](http://html1.mh-extra.com/html/faac/d700hs/d700hs_installation-manual_3133099003.webp)
2
ENGLISH
SAFETY GENERAL INSTRUCTIONS FOR
INSTALLATION AND MAINTENANCE
A correct installation procedure and the observation of the instructions for use are the necessary assumptions for a safe and
efficient automated door. Incorrect installation and use can cause serious damage to people and things.
Please carefully read the whole installation manual before starting with the installation. Do not carry out any modifications if
they are not mentioned in this manual. Do not install the operator for uses other than for the intended one.
For securing operations, use the supplied accessories or, in any case, securing means (screws, dowels, etc.) that are suitable
for the type of support and for the mechanical stresses exerted by the automated system.
Check if the sectional door complies with the EN12604 and EN12605 standards (information can be found in the door
documentation). For non-UE countries, in addition to the national standard references, observe the Standards mentioned
above to get a suitable safety level.
Check if the door is correctly balanced, correctly operating and equipped with mechanical opening stops.
During installation, observe the following:
•take and keep within reach the materials and tools indicated in the paragraph “Tools and materials”.
•use a stable support to perform operations with no rest on the ground.
•suitably protect face and hands before performing drilling operations.
•do not allow children play nearby during installation, use as well as during the release operation of the automated system.
•remove debris and objects that can prevent movement before activating the system electrically.
•remove the mechanical closures of the door so that it is the automated system that blocks the door when closed.
•apply the warning stickers according to the instructions.
•install manual release devices at a height not exceeding 180cm.
•install the external command devices at a height of 150cm or higher, distant from the area involved in the door movement,
but in such a position to be checked visually.
After installation, we recommend you to:
•check if the anti-crushing device is able to detect a 50 mm high object on the ground and if a weight
of Kg 20 applied to the door causes the opening movement to stop.
•make sure that no part of the automated system interferes with public spaces, such as sidewalks and/or streets.
•Use the automated system observing the regulations indicated in the “User’s Guide”.
•Compile, keep and update the maintenance register.
•The D700HS automated system does not require a periodical replacement of parts.
•Every month check the operation of the safety devices and of the anti-crushing system: a non-deforming 50 mm high object
on the ground must be correctly detected.
ATTENTION! CRUSHING RISK.
The automated system must not be used by children or people with reduced physical, mental, sensorial
capacity or by people without experience or the necessary training.
Children must not handle the automated system and must always be under surveillance.
•If the power cable of the D700HS operator is damaged, it must be replaced by skilled personnel with a new cable of the same
type. Do not use different power cables.
Read this instruction manual thoroughly before starting with the installation of the product.
The symbol indicates notes that are important for the safety of persons and for the good condition of the automated system.
The symbol draws your attention to the notes on the characteristics or the operation of the product.
Содержание D700HS
