33
C4000I
46
532100 - Rev.A
Tr
ansla
tion of the original instruc
tions
ENGLISH
Check that the connectors and wiring are intact.
Check that there are no signs of overheating, burning etc. of
electronic components.
12
Check that the earth connections are intact.
12
Check the operation of the circuit breaker and differential
switch.
12
Check that the limit switch is intact and that it operates
correctly.
12
Control devices
Check that the installed devices and radio controls are in good
condition and that they operate correctly.
12
Sensitive edges
Check condition, fastening and correct operation.
6
Deformable edges
Check that they are intact and correctly fastened.
12
Photocells
Check condition, fastening and correct operation.
6
Check the posts, ensuring that they are intact, correctly
fastened and free of deformation etc.
6
Flashing light
Check condition, fastening and correct operation.
12
Electric locks
Check condition, fastening and correct operation.
12
Clean the seats.
12
Access control
Check that the gate opens only when an authorised user is
recognised.
12
Complete automation system
Check that the automation operates correctly, following the
set logic, when using the various control devices.
12
Check that the gate moves correctly - smooth, regular and
without abnormal noise.
12
Check that both the opening and closing speed are correct
and that the stop positions and slow-downs provided for
are respected.
12
Check that the manual release operates correctly: when the
release mechanism is activated, it must only be possible to
move the gate manually.
6
Check that the maximum force required to move the leaf by
hand is less than 225 N in residential areas.
6
Check that the safety edges operate correctly when faced
with an obstacle.
6
Check that the encoder (where present) functions correctly
when an obstacle is detected.
6
Check that each pair of photocells is working correctly. 6
Check that there is no optical/light interference between the
pairs of photocells.
6
Check the force limitation curve (standards EN 12453 and
EN 12445).
6
Check that all necessary signage and warnings are present,
intact and legible: residual risks, exclusive use etc.
12
Check that the gate's CE marking and the DANGER, AUTO-
MATIC MOVEMENT warning sign is present, intact and legible.
12
13.2 FUSE REPLACEMENT
1. Remove the fuse cover by gently prising it off with
a screwdriver
33
.
2. Remove the fuse.
3. Assemble the new fuse.
4. Refit the fuse cover.
!
Only use the types of fuse indicated:
F1
F 6.3A (quick)
F2
F 2.5A (quick)
