![background image](http://html1.mh-extra.com/html/faac/b614/b614_instruction-manual_3109421013.webp)
2
B614 11
732998 - Rev.A
••••••
••••••
••••
••••
••••••
••••
••
••••••
••••••
••••••
BARRIER B614 230V
FAAC S.p.A. Soc. Unipersonale
Via Calari, 10 - 40069 Zola Predosa BOLOGNA
Italy
0116
0001
Tr
ansla
tion of the orig
inal instruc
tions
ENGLISH
3.5 PRODUCT IDENTIFICATION
The product is identified by the plate (
).
3.6 TECHNICAL SPECIFICATIONS
The B614 is an electromechanical barrier with a E614
electronic board fitted. The B614 must be installed
on the specific foundation plate and set onto a plinth.
RH/LH barrier
B614 makes it possible to build a right
hand or left hand barrier without modifying the
barrier body.
L
i
The barrier will be installed with the door towards
the inside of the property.
The barrier is defined by observing it from the door
side:
-
RH barrier
(right): the beam closes towards the
right (in a clockwise direction)
-
LH barrier
(left): the beam closes towards the left
(in an anticlockwise direction)
Irreversible system
To allow manual operation, the
release manoeuvre must be performed.
Encoder
B614 is fitted with an encoder. The encoder
constantly detects the precise position of the beam
and makes it possible to manage the end of stroke
and slowing downs stored with the set up.
Anticrushing operation
The encoder allows the board
to create the anticrushing feature:
-
the recognition of an obstacle during closure cau-
ses the manoeuvre to be reversed
-
the recognition of an obstacle during opening
causes the beam to stop.
Adjustable end of stroke
The barrier is fitted with an
adjustable mechanical end of opening and closing
stroke feature.
Equipment
A rectangular or round beam can be
installed. The components necessary for the instal-
lation and the optional equipment are listed in the
dedicated sections.
Balancing system
The balancing spring must be used
FAAC. The single or double spring depending on the
length and configuration of the installed beam must
be fitted in the definite fitting positions.
!
The balancing system is important for safety reasons
to ensure the stability and control of the beam during
movement and keep it operating properly over time.
Master-Slave Configuration
To install two barriers that
open in opposite directions it is necessary to create
the Master-Slave configuration.
5
Symbols: markings on product
Risk of crushing between the moving parts. Present
on the balancer
Risk of cutting, crushing or shearing of fingers or a
hand between the beam and the barrier body. It must
be placed on the trunk by the installation engineer.
"DANGER OF AUTOMATIC MOVEMENT" (not supplied) It must be
placed on the trunk by the installation engineer.
Sale code
Product name
IDENTIFICATION NUMBER
Month/year of prod
progressive number for the
month of production
Example:
made in:
January 2018
progressive:
0001