![background image](http://html1.mh-extra.com/html/faac/940sm-series/940sm-series_manual_3188783029.webp)
28
ENGLISH
ENGLISH
MANUAL
TWO-WAY
ONE WAY
PARTIAL OPENING
TOTAL OPENING
AUTOMATIC
DOOR OPEN
NIGHT
쐃
쐇
쐋
쐏
쐄
OPERA
OPERA
OPERA
OPERA
OPERATING FUNCTIONS
TING FUNCTIONS
TING FUNCTIONS
TING FUNCTIONS
TING FUNCTIONS
Selection is performed by pressing the keys on the fixed
part of the programmer - the function is indicated by the
relevant LED lighting up.
Note: when the “Night” or “Manual” modes have been
set, the relevant selection keys must be pressed to exit the
modes.
MANUAL
MANUAL
MANUAL
MANUAL
MANUAL
The sliding leaves are free and can be activated manually.
TWO
TWO
TWO
TWO
TWO-----W
W
W
W
WA
AA
AAYYYYY
Pedestrian transit is possible in both directions; the inside
and outside radars are enabled.
ONE W
ONE W
ONE W
ONE W
ONE WA
AA
AAYYYYY
Pedestrian transit is possible in one direction only; the
external radar is disabled.
P
PP
PPARTIAL OPENING
ARTIAL OPENING
ARTIAL OPENING
ARTIAL OPENING
ARTIAL OPENING
The door opens only partially (standard: 50%)
Partial opening can be adjusted in range from 10% to 90%
of total.
TOT
TOT
TOT
TOT
TOTAL OPENING
AL OPENING
AL OPENING
AL OPENING
AL OPENING
The door opens completely.
A
AA
AAUTOMA
UTOMA
UTOMA
UTOMA
UTOMATIC
TIC
TIC
TIC
TIC
The door opens (partially or totally) and then re-closes after
the set pause time (standard: 2 sec.).
Adjusting range of pause time: 0 to 90 sec.
DOOR OPEN
DOOR OPEN
DOOR OPEN
DOOR OPEN
DOOR OPEN
The door opens and stays open.
NIGHT
NIGHT
NIGHT
NIGHT
NIGHT
The door closes and the lock (if present) is activated. The
internal and external radars are disabled.
The Key command causes the door to open and re-close
after night pause time elapses (standard: 8 sec).
Adjusting range of night pause time : 0 to 240 sec.
To obtain partial opening in this mode, before selecting
the “Night” function, activate the “Partial Opening”
function .
SPECIAL FUNCTIONS
SPECIAL FUNCTIONS
SPECIAL FUNCTIONS
SPECIAL FUNCTIONS
SPECIAL FUNCTIONS
SETUP
SETUP
SETUP
SETUP
SETUP
Setup is the door initialisation function during which
parameters are self-learned.
To activate, simultaneously press keys
쐃
and
쐄
for 5 sec.
RESET
RESET
RESET
RESET
RESET
Reset is the function for restoring normal operating
conditions after some types of alarm have been signalled.
To activate, simultaneously press keys
쐇
and
쐋
.
LLLLLOCK
OCK
OCK
OCK
OCK
When active, the Lock function disables SD-Keeper.
To activate (and de-activate), simultaneously press keys
쐋
and
쐏
for 5 sec.
BA
BA
BA
BA
BATTTTTTERY INSERTION/CHANGE
TERY INSERTION/CHANGE
TERY INSERTION/CHANGE
TERY INSERTION/CHANGE
TERY INSERTION/CHANGE
To keep the clock inside SD-Keeper active even in the
event of a power cut, a 3V model CR1216 lithium battery
is provided.
To insert or change the battery, find the compartment on
the printed circuit (fig. 7) and observe the indicated polarity.
fig. 6
쐃
쐇
쐋
쐏
쐄
OK
fig. 7