manualshive.com logo in svg
background image

27

To the original purchaser only: 
FAAC International, Inc., warrants, for twenty-four 
(24) months from the date of invoice, the gate 
operator systems and other related systems and 
equipment manufactured by FAAC S.p.A. and 
distributed by FAAC International, Inc., to be 
free from defects in material and workmanship 
under normal use and service for which it was 
intended provided it has been properly installed 
and operated.
FAAC International, Inc.’s obligations under 
this warranty shall be limited to the repair or 
exchange of any part of parts manufactured 
by FAAC S.p.A. and distributed by FAAC Interna-
tional, Inc. Defective products must be returned 
to FAAC International, Inc., freight prepaid by 
purchaser, within the warranty period. Items 
returned will be repaired or replaced, at FAAC 
International, Inc.’s option, upon an examina-
tion of the product by FAAC International, Inc., 
which discloses, to the satisfaction of FAAC In-
ternational, Inc., that the item is defective. FAAC 
International, Inc. will return the warranted item 
freight prepaid. The products manufactured by 
FAAC S.p.A. and distributed by FAAC Internation-
al, Inc., are not warranted to meet the specific 
requirements, if any, of safety codes of any par-
ticular state, municipality, or other jurisdiction, 
and neither FAAC S.p.A. or FAAC International, 
Inc., assume any risk or liability whatsoever 
resulting from the use thereof, whether used 
singly or in combination with other machines or 
apparatus. 
Any products and parts not manufactured by 
FAAC S.p.A. and distributed by FAAC Internation-
al, Inc., will carry only the warranty, if any, of the 
manufacturer. This warranty shall not apply to 
any products or parts thereof which have been 
repaired or altered, without FAAC International, 
Inc.’s written consent, outside of FAAC Interna-
tional, Inc.’s workshop, or altered in any way so 
as, in the judgment of FAAC International, Inc., 
to affect adversely the stability or reliability of 
the product(s) or has been subject to misuse, 
negligence, or accident, or has not been oper-
ated in accordance with FAAC International, 
Inc.’s or FAAC S.p.A.’s instructions or has been 
operated under conditions more severe than, 
or otherwise exceeding, those set forth in the 
specifications for such product(s). Neither FAAC 
S.p.A. nor FAAC International, Inc., shall be liable 
for any loss or damage whatsoever resulting, 
directly or indirectly, from the use or loss of use 
of the product(s). Without limiting the foregoing, 

this exclusion from liability embraces a purchas-
er’s expenses for downtime or for making up 
downtime, damages for which the purchaser 
may be liable to other persons, damages to 
property, and injury to or death of any persons. 
FAAC S.p.A. or FAAC International, Inc., neither 
assumes nor authorizes any person to assume 
for them any other liability in connection with 
the sale or use of the products of FAAC S.p.A. 
or FAAC International, Inc. The warranty herein 
above set forth shall not be deemed to cover 
maintenance parts, including, but not limited 
to, hydraulic oil, filters, or the like. No agree-
ment to replace or repair shall constitute an 
admission by FAAC S.p.A. or FAAC International, 
Inc., of any legal responsibility to effect such 
replacement, to make such repair, or otherwise. 
This limited warranty extends only to whole-
sale customers who buy directly through FAAC 
International, Inc.’s normal distribution channels. 
FAAC International, Inc., does not warrant its 
products to end consumers. 
Consumers must inquire from their selling dealer 
as to the nature and extent of that dealer’s war-
ranty, if any. This warranty is expressly in lieu of all 
other warranties expressed or implied including 
the warranties of merchantability and fitness for 
use. This warranty shall not apply to products 
or any part thereof which have been subject 
to accident, negligence, alteration, abuse, 
or misuse or if damage was due to improper 
installation or use of improper power source, or 
if damage was caused by fire, flood, lightning, 
electrical power surge, explosion, wind storm, 
hail, aircraft or vehicles, vandalism, riot or civil 
commotion, or acts of God.

LIMITED WARRANTY

Содержание 402





























Отзывы: