TECHNICAL SPECIFICATIONS FOR CONTROL STATION
Electronic control circuit
A microprocessor with specific software
for controlling FAAC CITY bollards
Enclosure for control station
Wall fitting
Dimensions of enclosures
According to system configuration
Protection class
IP 55
Operating temperature
-15°C + 70°C
Control station power supply
230V + 6/-10% 50Hz
Protective switch
(not supplied)
Differential thermal breaker
1P + N – 6 A
÷
16 A - 30 mA – 6 KA
Service transformer
230/24Vac - 100 VA
Maximum number of FAAC CITIES
connectable to the control station
Max 10 FAAC CITIES with simultaneous
movement - the 1
st
FAAC CITY is
connected to the master unit -- the
others are connected to additional slave
units - the enclosure dimension depends
on the quantity of FAAC CITIES
WALL FITTING ENCLOSURES FOR STATIONS CONTROLLING THE MOVEMENT
OF FAAC CITY BOLLARDS
Dimensions
L x H x D
Material
System configuration
300 X 380 X 160
GW PLAST 120° C
-
For basic system with 1 FAAC CITY
308 x 460 x 160
GW PLAST 120° C - For system with 1 accessory FAAC CITY
- For basic system with 2 FAAC CITIES
405 X 650 X 250
POLYESTER
- For system with 3 accessory FAAC CITIES
- For basic system with 5 FAAC CITIES
515 X 650 X 250
POLYESTER
- For system with 5 accessory FAAC CITIES
-
For basic system with 8 FAAC CITIES
FAAC S.p.A. Via Benini, 1 40069 Zola Predosa Bologna (Italia) tel. +39 051 61724 www.faac.it
