F5 Viprion, Руководство пользователя

Страница: 31 / 74

Installing a blade
If a blank is installed in the slot in which you want to install a blade, you must first remove it.
1. Fully extend the eject levers, located on each side of the blade, into the open position.
2. Carefully lift the blade and align the guide grooves on either side with the corresponding grooves on the interior of
the slot.
Important: Verify that the blade is aligned with these grooves; otherwise, the blade does not seat
correctly in the platform.
3. Slide the blade in until it is fully seated in the slot.
4. When the eject levers engage the chassis, press the eject levers on the blade towards the center of the blade until
locked in place.
Platform Guide: VIPRION | Platform Installation | 31