manualshive.com logo in svg

F5 Viprion, Руководство пользователя

Поделиться
Скачать
F5 Viprion Скачать руководство пользователя страница 47

Guidelines for AC-powered equipment

An AC-powered installation must meet the following requirements:

•

Install the unit using a 20 Amp external branch circuit protection device.

•

Normally, one power feed is used for each individual power supply.

Guidelines for DC-powered equipment

A DC-powered installation must meet the following requirements:

•

Install the unit using a 50 Amp external branch circuit protection device.

•

For permanently connected equipment, incorporate a readily accessible disconnect in the fixed wiring.

•

Use only copper conductors.

•

Cabling for the system must be grounded on both sides.

•

Normally, one power feed is used for each individual power supply.

Guidelines for VIPRION DC platform installation

Important:  The VIPRION platform must be installed in a restricted access location, such as a central office
or customer premises environment.

Note:  The power supply for the VIPRION DC Platform does not have an on/off switch. You control the
power from the DC power source.

Note:  You must use copper wire for the ground wire and all lead wires.

Note:  You should coat bare conductors with an appropriate antioxidant compound before you make crimp
connections. You should bring all unplated connectors, braided strap, and bus bars to a bright finish and
then coat them with an antioxidant before you connect them.

NEBS platform guidelines

The following information applies to the Network Equipment-Building System (NEBS) version of the VIPRION platform.

This equipment meets NEBS requirements per GR-63-CORE.

Platform Guide: VIPRION  |  Environmental Guidelines  |   47

Содержание Viprion











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды