F5 VIPRION 2400 Скачать руководство пользователя страница 26

Страница: 26 / 86

Hardware

Quantity

AC power cables (C19 to NEMA 6-20P)

Note: The power cables included with this unit are for exclusive use with this unit and
should not be used with other electrical appliances.

Two-point rack mounting brackets (pre-installed on chassis)

Four-point rack mounting rail kit (includes two rail assemblies, eight #8-32 thumb screws,
and two cage nuts)

Cable routing brackets

Cable management covers

Hardware included with blades

VIPRION

B2000 Series blade should include all of the hardware components listed here.

Hardware

Quantity

RJ45 to DB9 console port cable (beige)

RJ45F to RJ45M rolled adapter (beige)

SFP+ 10G transceiver modules (B2100 and B2150 only)

Electrical static discharge (ESD) strap

Peripheral hardware requirements

For each platform, you might need to provide additional peripheral hardware. If you plan to remotely
administer the system, it would be helpful to have a workstation already connected to the same subnet as
the management interface.

Description

Type of hardware

You must provide networking devices that are compatible with the network
interface ports on the platform. You can use either 40 Gigabit Ethernet, 10

Network hubs, switches, or
connectors to connect to the

Gigabit Ethernet, or 10/100/1000 Ethernet switches. You can use either
10/100/1000/10000-Gigabit or 40-Gigabit Ethernet switches

platform network interface
ports

You can use any USB-certified CD/DVD mass storage device or a USB
flash drive for installing upgrades and for system recovery.

Note: External CD/DVD drives must be externally powered if they exceed
the maximum current draw allowed by the USB specification (500mA).

External USB CD/DVD drive
or USB flash drive

You can remotely manage the platform by connecting to a serial console
terminal server through the console port.

Important: In the event that network access is impaired or not yet
configured, the serial console might be the only way to access the chassis.

Serial console

Platform Installation

Содержание VIPRION 2400























































































Результаты поиска

Содержание VIPRION 2400

Отзывы:

Похожие инструкции для VIPRION 2400

Бренды по названию

Популярные бренды

F5 VIPRION 2400, Руководство пользователя

Результаты поиска

Содержание VIPRION 2400

Отзывы:

Похожие инструкции для VIPRION 2400

Бренды по названию

Популярные бренды