F5 FirePass, Руководство администратора

Страница: 175 / 182

Configuring FirePass Failover Servers and Cluster Servers
FirePass
™
Server Administrator Guide 7 - 7
Configuring clustered servers
Note
Clustering screens and links are visible only if you have a Clustering license
installed.
To configure internal synchronization
1. Under the Server tab on the left side of the Administrative Console,
click the Maintenance link.
2. Click the Network Configuration link.
3. Click the Clustering link at the top of the screen.
4. Configure the Service on master by selecting the Synchronization
service to use from the pick list.
5. Configure the slave n services by entering the name and ports of
Synchronization services configured on the corresponding slave
servers, for each listed service on the master.
To configure Load Balancing
1. Under the Server tab on the left side of the Administrative Console,
click the Maintenance link.
2. Click the Network Configuration link.
3. Click the Clustering link at the top of the screen.
4. Complete the Load Balancing table, as follows:
• If this is the master in a cluster, the screen displays a table with a
column for each node in the cluster, beginning with the master.
Each row corresponds to an HTTP-enabled User service on the
master.
In each cell of each slave column, enter the host name and port of
a User Service on the respective slave.
• If this is a slave in a cluster, the screen displays a table with two
columns: the first column for this server, and the second for the
master node. Each row corresponds to one HTTP-enabled User
service on this server. Use the second column to associate this
service with a service on the master.
For each listed service on the slave, enter the host name and port
of an HTTP-enabled User service configured on the master.
Note
All of these entries should be reciprocal between each node pair. That is, the
configuration on this server should match the corresponding entries on the
other member of each master/slave pair of services.