F5 ARX-4000, Руководство по установке оборудования

Страница: 69 / 94

Connecting the Out-Of-Band Management Port
ARX®4000 Hardware Installation Guide 6 - 13
The running-config script set up all local parameters, such as the hostname
and the network settings:
SWITCH# ; ARX4000
SWITCH# ; Version 4.00.000.11093 (Jun 3 2008 17:40:32) [nbuilds]
SWITCH# ; Database version: 400000.6
SWITCH# ; System UUID 876616f6-79ac-11d8-946f-958fcb4e6e35
SWITCH# ;
SWITCH#
config
SWITCH(cfg)# logging level all notice
SWITCH(cfg)# exit
SWITCH# ;=============================== system ================================
SWITCH#
config
SWITCH(cfg)# clock timezone 5
SWITCH(cfg)# hostname prtlndA4k
prtlndA1k(cfg)# ...
prtlndA1k(cfg)# exit
prtlndA1k#
If you copied the private subnet and mask from the defunct switch, this
completes the switch replacement. Otherwise, the new switch learns its
private subnet from its peer, re configures itself, and reboots. (A reboot is
necessary to change the private subnet of an ARX.)
See the ARX CLI Network-Management Guide for detailed configuration
instructions.
Connecting the Out-Of-Band Management Port
After booting the switch, you can connect the Ethernet OOB management
port to a management station or network. You can use this interface to
access the Graphical User Interface (GUI) or the Command Line Interface
(CLI).
To access the GUI, direct a web browser to the interface over HTTPS (for
example, https://10.1.23.11/). To log in, enter the crypto-officer username
and password, as entered in the preceding script.
To access the CLI, use SSH with the management port IP address and the
crypto-officer username (for example, ssh admin@10.1.23.11).
For instructions on getting starting with the GUI, see the ARX GUI Quick
Start: Network Setup . For instructions and best practices for using the CLI,
see the ARX CLI Network-Management Guide .