F5 ARX-4000, Руководство по установке оборудования

Страница: 63 / 94

Booting the Switch
ARX®4000 Hardware Installation Guide 6 - 7
Matching the Private Subnet
The next set of questions ask for the switch’s private subnet , the private
VLAN for that subnet, and the VLAN for a private metalog subnet . If the
failed switch was in a redundant pair and/or Resilient-Overlay Network
(RON), the private subnets of the replacement switch should match those of
the switch that failed. Each ARX uses its private subnet for communication
with other ARXes in the same RON and/or the switch’s redundant peer. All
private subnets in the RON and/or pair are carried by the same VLAN. This
private VLAN, and the separate metalog VLAN, must be reserved for ARX
traffic only.
The private-subnet and VLAN information appears at the top of a the failed
switch’s show running-config output. The following example shows the top
of a running-config file from a failed switch. The private-subnet information
is highlighted in bold text:
; ARX-4000
; Version 4.00.000.11093 (Jun 3 2008 17:40:32) [nbuilds]
; Database version: 400000.6
; Generated running-config Wed Jun 4 11:52:30 2008
; System UUID db922942-876f-11d8-9110-8dtu78fc8329
;
ip private vlan internal 1002 metalog 1003 subnet 169.254.94.0 255.255.255.0
;
config
logging level all info
exit
...
Entering the Private Subnet
Enter the private subnet and VLAN of the failed switch, as well as the
VLAN for the private metalog subnet. The VLANs must be unique in your
network, shared only amongst the ARXes in the RON. The defaults (1002
and 1003) may be sufficient for your installation. For example:
...
The switch's internal subnet requires an IP address and mask.
7. Enter the switch's private IP address
in the format nnn.nnn.nnn.nnn.(default=169.254.6.0) # 169.254.94.0
8. Enter the switch's private subnet mask
in the format nnn.nnn.nnn.nnn.(default=255.255.255.0) # <Enter>
The private subnet VLAN is used externally for redundancy traffic.
Be sure this value does not conflict with existing VLAN IDs.
9. Enter the chassis's private subnet VLAN
in the format integer [1-4095].(default=1002) # <Enter>
The private subnet metalog VLAN is used for storing file-change
logs on battery-backed NVRAM, possibly on a redundant peer.
Be sure this value does not conflict with existing VLAN IDs.
10. Enter the chassis's private subnet metalog VLAN
in the format integer [1-4095].(default=1003) # <Enter>