F5 ARX-4000, Руководство по установке оборудования

Страница: 66 / 94

Chapter 6
Connecting the Switch to the Network
6 - 10
Encrypted master key:
2oftVCwAAAAgAAAApwazSRFd2ww/H1pi7R7JMDZ9SoIg4WGA/XsZP+HcXjsIAAAADDRbMCxE/bc=
prtlndA1kB# ...
Applying the Master Key
As shown previously, there is a prompt for the master key in the initial-boot
script. You can answer this prompt with the encrypted master key. The
script then prompts for the wrapping password, as shown in the following
example:
...
The master key is used to encrypt critical security parameters.
15. Enter the master key
in the format base64-encoded key or keyword 'generate'.(default=generate) #
2oftVCwAAAAgAAAApwazSRFd2ww/H1pi7R7JMDZ9SoIg4WGA/XsZP+HcXjsIAAAADDRbMCxE/bc=
The wrapping password is used to encrypt and decrypt the master key.
16. Enter the wrapping password
in the format text (6-28 characters). # an0ther$ecretpw
Confirm the wrapping password # an0ther$ecretpw
...
Sample: Replacing a Redundant Peer
This following sample script uses the private subnet, the UUID and the
master key to replace a failed peer.
Acopia Switch Startup
This Acopia switch does not currently have critical system
information programmed. The following wizard prompts you
for this information. You can connect to the switch through
the out-of-band management interface when you finish.
To restart the configuration program, enter 'r' at any prompt.
Acknowledge acceptance of the following terms and conditions
by entering 'yes' at the next question.
1. Press <Enter> to continue. #
<Enter>
...
2. Enter 'yes' to accept these terms and conditions
in the format 'yes' or 'no'.
# yes
The switch's management port requires an IP address and mask.
3. Enter the management port IP address
in the format nnn.nnn.nnn.nnn or 'none'. # 10.1.23.12
4. Enter the management port subnet mask
in the format nnn.nnn.nnn.nnn.(default=255.0.0.0) # 255.255.255.0
The switch's management port requires a gateway IP address.
5. Enter the gateway IP address for the management interface