| English
4
GENERAL POWER TOOL SAFETy WARNINGS
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future refer
-
ence. The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or bat
-
tery-operated (cordless) power tool.
Work area safety
f
f
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
f
f
Do not operate power tools in explosive atmo
-
spheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may
ignite the dust or fumes.
f
f
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
f
f
Power tool plugs must match the outlet. Never mod
-
ify the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric
shock.
f
f
Avoid body contact with earthed or grounded surfac
-
es, such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
f
f
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
f
f
Do not abuse the cord. Never use the cord for carry
-
ing, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges and moving parts.
Damaged or entangled cords increase the risk of elec
-
tric shock.
f
f
When operating a power tool outdoors, use an exten
-
sion cord suitable for outdoor use. Use of a cord suit
-
able for outdoor use reduces the risk of electric shock.
f
f
If operating a power tool in a damp location is un
-
avoidable, use a residual current device (RCD) protect
-
ed supply. Use of an RCD reduces the risk of electric
shock.
Personal safety
f
f
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inatten
-
tion while operating power tools may result in serious
personal injury.
f
f
Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing pro
-
tection used for appropriate conditions will reduce
personal injuries.
f
f
Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on
the switch or energizing power tools that have the
switch on invites accidents.
f
f
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in per
-
sonal injury.
f
f
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
f
f
Dress properly. Do not wear loose clothing or jewel
-
ery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewelery or long hair can
be caught in moving parts.
f
f
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Power tool use and care
f
f
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
f
f
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
f
f
Disconnect the plug from the power source and/or
the battery pack from the power tool before mak
-
ing any adjustments, changing accessories, or storing
power tools. Such preventive safety measures re
-
duce the risk of starting the power tool accidentally.
f
f
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
f
f
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s op
-
eration. If damaged, have the power tool repaired be
-
fore use. Many accidents are caused by poorly main
-
tained power tools.
f
f
Keep cutting tools sharp and clean. Properly main
-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
f
f
Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into ac
-
count the working conditions and the work to be per
-
formed. Use of the power tool for operations differ
-
ent from those intended could result in a hazardous
situation.
Service
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is main
-
tained.
SAFETy WARNINGS FOR CIRCULAR SAWS
Cutting procedures
DANGER:
f
f
Keep hands away from cutting area and the blade.
Keep your second hand on auxiliary handle, or motor
housing. If both hands are holding the saw, they can
-
not be cut by the blade.
English