6
4. Intelligent Human Detection
Go to
Settings
-
Intelligent Human Detection
and enable it. Then EZVIZ will send
you notifications when a trigger is detected.
To let the camera respond differently in different situations, you can customize
the detection notification by changing settings of detection sensitivity. The
higher sensitivity is, the further distance can be detected.
5. Active Defense
With intelligent human detection enabled, the camera will automatically trigger
alarm and start recording once human or animal is detected. Alarm stops until
no motion is detected.
In addition, you can also tap the
Active Defense
button on the device page to
trigger an alarm. The camera will sound an alarm and the spotlight will flash
quickly to deter intruders, which can last up to one minute.
FAQ
Q: If the camera is offline on the App, will the video recording be continued?
A:
If the camera is powered on but disconnect to the Internet, then local
recording will continue but cloud recording will stop. If the camera is powered
off, both video recordings will stop.
Q: Why the alarm is triggered when nobody in the image?
A:
Try to set the alarm sensitivity lower. Please notice that vehicle and animals
are also the trigger source.
Q: Does the camera support adding an SD card?
A:
The camera has a built-in 32G eMMC memory card, loop recording, and does
not support SD card capacity expansion.
Q: Why is the memory card capacity less than 32G displayed on the App?
A:
Due to the calculation difference between binary and decimal arithmetic, the
memory card's actual capacity is about 90% of the standard capacity.
