Ezgo MPT 1000 48V, Руководство пользователя

Страница: 57 / 78

Owner’s Guide
Page 51
MAINTENANCE PROCEDURES
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
before servicing.
Wear eye protection when working on the vehicle. Use extra care when
working around batteries, or using solvents or compressed air.
To reduce the possibility of causing an electrical arc, which could result in
a battery explosion, turn off all electrical loads from the battery before
removing battery wires.
Wrap wrenches with vinyl tape to reduce the possibility of a dropped wrench
‘shorting out’ a battery, which could result in an explosion.
The electrolyte in a battery is an acid solution which can cause severe burns
to the skin and eyes. Treat all electrolyte spills to the body and eyes with
extended flushing with clear water. Contact a physician immediately.
Any electrolyte spills should be neutralized with a solution of 2 teaspoons (10 ml) sodium
bicarbonate (baking soda) dissolved in 1 quart (1 liters) of water and flushed with water.
Aerosol containers of battery terminal protectant must be used with extreme care. Insulate
metal container to reduce the possibility of can contacting battery terminals which could
result in an explosion.
It is in the best interest of both vehicle owner and service technician to carefully follow the procedures recommended in this
manual. Preventative maintenance, applied at recommended intervals, is the best guarantee for keeping the vehicle both
dependable and economical.
This vehicle will give years of satisfactory service, providing it receives regular maintenance. Refer to the Periodic Service
Schedule for appropriate service intervals ((Ref. Fig 1 on page 49).
ROUTINE MAINTENANCE
To prolong vehicle life, some maintenance items must be serviced more frequently on vehicles used under severe
driving conditions such as extreme temperatures, extreme dust/debris conditions, or frequent use with maximum load.
To access the powertrain for routine maintenance, lift or remove the seat and remove the rear access panel. For major
repair, refer to the appropriate Technician’s Repair and Service Manual.
Some service procedures may require the vehicle to be lifted. Refer to LIFTING THE VEHICLE for proper lifting procedure
and safety information.
Tire Inspection
Tire condition should be inspected per the Periodic Service Schedule (Ref. Fig 1 on page 49). Inflation pressures should be
checked when the tires are cool. Be sure to install the valve dust cap after checking or inflating.
Brakes
To reduce the possibility of severe injury or death, always evaluate pedal travel before oper-
ating a vehicle to verify some braking function is present.
All driving brake tests must be done in a safe location with regard for the safety of all per-
sonnel.