15
The timer can only be adjusted in 30-minute increments (i.e. 00:00 - 00:30; 00:30 - 01:00, etc.)
.
When
“OFF”
begins
flashing,
use
to
select
the
desired
hour
and
minute
to
turn
off
the
heate
at any time to clear the digits and shut down “OFF” timer.
2 Set ON/OFF time and temperature on a weekly cycle
1.
Press
. When “MON” begins flashing, press
the desired hour and minute to turn on the heater.
“ON” timer.
3 times. When “ON” begins flashing, use
to select
at any time to clear the digits and shut down
NOTE:
For the timer function to activate, the product must be turned OFF via the remote, the
heater function will not start with the product remainingON.
note:
r.
2.
Press
Press
3.
Press
again. When “18” beginsflashing, use
to select the desired temperature for Monday.
note:
If the temperature was previously set, those digits will be shown instead of“18”.
4.
Press
again. When “TUES” appears on the screen and “ON” begins flashing, use
to select the desired
hour and minute to turn on the heater for Tuesday.
5.
Press
again. When “OFF” begins flashing, use
to select the desired hour and minute to turn off the
heater for Tuesday.
6.
Press
again. When “18” beginsflashing, use
to select the desired temperature for Tuesday.
7.
Repeat steps 1 to 6 to set the “ON/OFF” time and temperature for Wednesday, Thursday,Friday,
Saturday, and Sunday.
8.
Press
or
to complete programming, ensuring to aim the remote control at the receiver, located in the
middle of the appliance. The appliance will “beep” once to confirm that programming has been successful.
Open
window
warning
If
the
room
temperature
decreases
by
10
D
egrees
Celsius
within
3
minutes,
the
appliance
will
assume
there
is
an
open
window
nearby.
In
order
to
conserve
energy,
the
heater
will
automatically
switch
from
High
Heat
to
Low
Heat,
or
if
the
heater
is
already
at
Low
Heat,
it
will
turn
off
completely.
When
switching
from
High
Heat
to
Low
Heat,
the
appliance
will
beep
3
times
and
the
digital
display
will
flash
“88”
3
times
before
displaying
the
existing
heating
status.
When
switching
from
Low
Heat
to
Off,
the
appliance
will
beep
3
times
and
the
digital
display
will
flash
“88”
continuously.
Toreset
the
heating
function,
see
“operating
remote
control”
section.