Eyevis EYE-LCD4600-SN Series Скачать руководство пользователя страница 8

EYE-LCD4600M/W-SN

8

wipe it off with cotton swab or soft cloth immediately, otherwise display surface will be deteriorated. 
If water gets inside the LCD module, circuit may be damaged.

 )

This product contains chemicals, including lead, known to cause birth defects or other reproductive 

harm.

 

3

Wash hands after handling.

1.5  Unused for long periods of time

For added protection for this video product during a lightning storm, or when it is left unattended and unused 
for long periods of time, unplug it from the wall outlet. This will prevent damage to the display due to lightning 
and AC power-line surges.

1.6  Precautions for the remote control batteries:

 )

Only use the specified battery type

 )

Be sure to insert batteries by matching the + and -.

 )

Do not recharge, heat, disassemble, short or throw batteries into a fire.

 )

Do not use the batteries beyond their usage period (designated on the batteries), do not leave worn out 

batteries in the unit.

 )

Do not mix different types of batteries together.

 )

Do not mix a new battery with a used one.

 )

If these precautions are not observed, it may lead to battery leakage or explosion and cause burn and 

injury.

 )

If leaked liquid gets into your eyes or gets in touch with your skin, it may hurt your eyes or your skin. If 

leaked liquid gets into your eyes or mouth or comes in contact with your skin, rinse the contacted area 
with clean water immediately and consult your doctor. If the leaked liquid comes in contact with your 
cloth, rinse the contacted area with clean water immediately. If the leaked liquid comes in contact with 
other equipments, clean them without touching the leaked liquid.

1.7  Cleaning 

 )

If dust has collected on the power plug connectors, remove the plug from the outlet and clean off the 

dust.

 

3

 This dust may cause a fire due to reduced insulation of the plug.

 )

Remove the power plug before cleaning.

 

3

Always unplug appliance from electrical outlet before cleaning and servicing and when not in use. 
Never yank cord to pull plug from outlet. Grasp plug and pull to disconnect.

 

3

If not, it may cause electric shock.

 )

Consult your dealer for internal cleaning once a year.

 

3

if you allow dust to accumulate on the unit, it may cause fire or malfunction when you operate it.

 

3

Cleaning is effective especially before the rainy season when humidity is high.

 

3

Refer to your dealer about the internal cleaning.

 )

Cabinet cleaning

 

3

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Содержание EYE-LCD4600-SN Series




























































Отзывы: