Eyevis EYE-LCD4600-SN Series, Руководство пользователя

Страница: 41 / 59

EYE-LCD4600M/W-SN 41
4.2 Firmware Update Scaler
) Power Off the display
)
Connect the flasher cable (shown in picture) to the PC.
) Connect the flasher cable to port “AUX1” on the the display
)
SET dipswitch No. 6 to On
) Start the “Flash Upgrader Software”
3
Choose Connection “Serial”
3
Choose Baud Rate “115000”
3
Select the appropriate COM-Port where the flasher cable is connected to
3
Press the “Flash”- Button
)
Power On the Display to start the flash upgrade
) When the update is finished, reset DIP Switch No. 6 to off and restart the display