Eyevis EYE-LCD4600-SN Series, Руководство пользователя

Страница: 30 / 59

EYE-LCD4600M/W-SN 30
In the upper part of the window the display-wall is shown visually. A single display can be selected with the
mouse to work with it. When a display is selected, the adjustments, can be read by the button “Read current”.
Example:
COM-Port Connection (loop-
through signal)
3.3 GETTING STARTED & MENU FUNCTION
3.3.1 EYE-LCD Control Software
)
Open the “eyeCube Software” to start the program for the
configuration of your display wall
) Enter your password
3.3.2 Program Area “Preference”
1
2
3
4
Control PC
COM 1
If you encounter Timeout problems (eyeCube reports “No answer from the projector” but
the answer appears in the report window shortly afterwards) you have to increase the
eyeCube Timeout Value in the Windows registry. Depending on your version of eyeCube the
keys can be found either in
HKEY_CURRENT_USER->Software->eyevis->eyeCube->Timeout
or in
HKEY_CURRENT_USER->Software->gcc->eyeCube->Timeout
A Timeout of 3 seconds for a SetGet-operation, of 5 seconds for ReadAllTimeout and of 10
seconds for GetSet for should normally be sufficient.
Notice that the eyeCube application must be closed while editing the key in the registry.
Close the registry editor before starting eyeCube to apply your changes.