Eyevis EYE-LCD4600-SN Series, Руководство пользователя

Страница: 29 / 59

EYE-LCD4600M/W-SN 29
3.2.9 Power Scheduler
) With the Power Scheduler you can switch the display on and off at specified times. You can enter five
different configurations that can be combined or used separately. Every configuration consists of an
interval of days of the week and both a „Power On“ and a „Power Off“ time. Entries are only executed if
they are marked „Active“. From all active configurations „Power On“ and „Power Off“ events are generated
at the specified times.
)
If there is both a „Power On“ and a „Power Off“ event specified for a specific point in time, the „Power
On“ event is executed. If in a configuration the „Power Off“ time is smaller than the „Power On“ time the
„Power Off“ event is executed the next day.
) If the scheduler function is used in a wall it is usually sufficient to configure only the display attached
to the IR receiver - the master. The master will broadcast the Power On/Power Off events to the
other displays. These events are executed a non-master displays
unless there is an active scheduler
configuration on these display . Thus it is also possible to configure the displays separately.
)
Time and date can be directly set and serve to calculate the correct day of the week. Notice that the date
is given in central european format, i.e. DD/MM/YYYY.
Scheduler Menu
From
Mon
To
Fri
Starit Time
08:00:00
End Time
18:00:00
Active
Yes
Power Scheduler
Mon-Fri 08:00:00-18:00:00
Active
Mon-Fri 08:00:00-18:00:00
Not Active
Mon-Fri 08:00:00-18:00:00
Not Active
Mon-Fri 08:00:00-18:00:00
Not Active
Mon-Fri 08:00:00-18:00:00
Not Active
RTC Time
14:24:13
RTC Date
23/01/2011