manualshive.com logo in svg

Eyevis EC series, Руководство пользователя, Страница: 30 / 72

Поделиться
Скачать
Eyevis EC series Скачать руководство пользователя страница 30

Adjusting the mirror

If necessary, remaining geometrical mistakes that cannot be corrected 

via the carriage have to be corrected using the adjustment nuts on the 

mirror suspension.

 

)

note:

To correct keystoning using the mirror screws requires in-depth 

know-how of the effects as well as experience. For this reason, do not 

adjust the mirror yourself or only after completing an eyevis training.

To correct keystoning on the mirror:

1. 

Open the top cover.

 

ª

The adjustment nuts are now accessible.

Fig. 11:  

X1

X2

X3

Y1

Y2

Y3

Z1

Z2

Z3

Cube Version with 3 (three) mirror adjustment bars

Fig. 12:  

W1

W2

W3

Y1

Y2

Y3

Z1

Z1

Z2

Z3

X1

X1

X2

X3

 Cube Version with 4 (four) mirror adjustment bars

2. 

Turn the screws Z1/Y1/X1/(W1) in a clockwise direction.

 

ª

Keystoning is corrected, the right-hand side of the image moves 

outwards.

28

EC CUBE with LED Projection Engine

AsseMbly

Содержание EC series









































































Отзывы:

Нет отзывов