Eyevis EC-LED-SLIM Series, Руководство пользователя

Страница: 29 / 60

Mounting to wall
Requirements for wall mounting
Following requirements must be met for wall mounting:
3
Wall must be straight.
3
Wall must be able to bear the weight of the cubes.
) NOTE
If the wall is not suitable it can lead to displacement and bracing between the cubes.
) NOTE
The top cover must be installed on the top cubes before mounting the cube
housings to the wall. See „Installing the top cover“ on page 33.
Installation
To wall mount two cubes:
1. Loosen both screws under the projector and then remove the projector.
2. The top cover must be installed on the to cubes.
3. Attach the wall mount to the wall. The wall mount consists of different
parts. A left , a right and if needed a middle part.
Use a spirit level for aligning the straight.
Fig. 20: Wall mount for two cubes
4. Hang the cube housing on the wall mount. Be sure, that the cube housing
is correctly hooked to the wall mount.
The cube housing can be aligned in the height by using the eyebolts (a).
Fig. 21: Hang cube on wall mount
(a)
Fig. 22: Mounting the eyebolts
EC-LED-SLIM Series 29
Version 1.2 | October 2018