-
19
-
4. After operation
Drain the liquid from the unit.
（
1
）
Pull the drain cover lightly toward yourself, and lift and
remove the cover.
（
2
）
Take out the drain hose and remove the drain cock
stopper to drain the liquid.
Drain cover
Drain cover
grip
Drain hose
Drain stopcock
Drain hose
Run
Stop
Pump
Alarm
Refrigerator
Pump
Set
PV
Run/Stop
℃
Run
Stop
Pump
Alarm
Refrigerator
Pump
Set
PV
Run/Stop
℃
(1) Stopping operation
(2) Stopping pump
3. Stopping operation
(1)
Press the [Run/Stop] key. Operation will stop.
・
Control Status [Run/Stop] LED will goes off.
※
If you turn off the mains switch without terminating
the control, the unit resumes the control
automatically by turning on the mains switch.
※
The power failure recovery function has been set to
ON before shipment.
(2)
Close the valve for adjusting flow volume
(3)
Press the [Pump] key. The circulation pump will stop.
・
The Circulation pump [ Pump] LED will go off.
※
If you turn off the mains switch without stopping the
circulation pump, it resumes the operation of the
circulation pump automatically by turning on the
mains switch.
※
The power failure recovery function has been set to
ON before shipment.
※
If you do not operate this unit for a long time, turn
off the power switch and mains switch and
disconnect the mains plug from AC outlet.
※
Drain the liquid from the bath, piping line and the
circulation pump.
Treatment after operation
After operation, drain the liquid from the tank to
remove Impurities and avoid generating scale or
stain. Also drain the liquid from circulation
container or lines if you do not use the unit for a
long time. If you use this unit without changing
the liquid, the circulation line may be clogged by
impurities and It may cause the troubles. Please
change the liquid periodically.
Caution
