extronics iWAP200, Инструкция по установке и эксплуатации

Страница: 17 / 23

Operating Manual
17
4.3.2 Surface Coating
The iWAP200 enclosure has been coated with a material to prevent ‘tea staining’ of
the stainless steel by build-up of salt deposits in marine environments. Avoid damage
of the surface of the enclosure during handling.
However, if ‘tea staining’ does occur, it is purely cosmetic and does not affect the
performance of the enclosure.
If the coating is damaged, it can easily be re-applied in the field. Contact Extronics for
details.
4.4 Safety Precautions
Important For the installation, maintenance and cleaning of the units, it is
absolutely necessary to observe the applicable regulations and
provisions concerned with explosion protection (EN 60079-0, EN 60079-
14) as well as the Accident Prevention Regulations.
4.5 Cleaning and Maintenance Intervals
The cleaning intervals depend on the environment where the system is installed.
4.6 Aggressive substances and environments
The iWAP200 is not designed to come into contact with aggressive substances or
environments, please be aware that additional protection may be required.
4.7 Exposure to external stresses
The iWAP200 is not designed to be subjected to excessive stresses e.g. vibration,
heat, impact. Additional protection is required to protect against these external
stresses.
The iWAP200 will require additional protection if it is installed in a location where it
may be subjected to damage.