extronics iWAP200, Инструкция по установке и эксплуатации

Страница: 16 / 23

Operating Manual
16
4 Intended Purpose Usage
Important Before setting the units to work read the technical documentation
carefully.
Important The latest version of the technical documentation or the corresponding
technical supplements is valid in each case.
The iWAP200 is built using modern components and is extremely reliable in
operation; however it must only be used for its intended purpose. Please note that
the intended purpose also includes compliance with the instructions issued by the
manufacturer for installation, setting up and service.
Any other use is regarded as conflicting with the intended purpose. The manufacturer
is not liable for any subsequent damage resulting from such inadmissible use. The
user bears the sole risk in such cases.
4.1 Transportation and Storage
All iWAP200 devices must be so transported and stored that they are not subjected
to any excessive mechanical stresses.
4.2 Authorized Persons
Only persons trained for the purpose are authorized to handle the iWAP200; they
must be familiar with the unit and must be aware of the regulation and provisions
required for correct installation as well as the relevant accident prevention
regulations.
4.3 Cleaning and Maintenance
The iWAP200 and all its components require no maintenance and are self-
monitoring. All work on the iWAP200 by personnel who are not expressly qualified for
such activities will cause the guarantee to become void.
4.3.1 Screw Thread Lubrication
The threads of the lid screws and inserts have been coated with a thin layer of Rocol
251 stainless steel anti-seize grease. It is recommended that this grease should be
periodically renewed if the lid is opened frequently, to prevent the stainless threads
from binding.
Warning Use only Rocol 251 or Loctite 771 as thread lubricants, as other
materials may damage the gasket and invalidate the IP rating of the
enclosure