Extron electronics XTP T USW 103, Руководство пользователя

Страница: 22 / 46

XTP T USW 103 Switcher • Operation 14
Operation
This section contains information for front panel operation and configuration of the
XTP T USW 103. Topics in this section include:
•
Front Panel Features
• Front Panel Operation
• EDID
• Reset Mode
Front Panel Features
HDCP
SIGNAL
AUDIO
SIGNAL CLIP
AUTO
SWITCH
XTP T USW 103
CONFIG
1
2
3
1 2
3
STATUS
MODE NORMAL AUTO
A B C D E
Figure 11. XTP T USW 103 Front Panel
A
Auto Switch LED — Lights when the transmitter is in auto switch mode.
B
Configuration port
— Connect a host device to the front panel USB mini-B
configuration port.
C
Input selection buttons — Select inputs 1 through 3 or modes of operation. The
corresponding LEDs light to indicate the active input.
D
Status LEDs — The Signal LEDs light to indicate the signal presence of each input.
The HDCP LEDs light when the signal on the corresponding input is HDCP-compliant.
Input 1 (the VGA connector) does not have an HDCP LED.
E
Audio Signal Clip LED — Lights when the analog audio input signal is -3 dBFS or
above. The light remains lit for 200 ms after the audio input signal drops below -3 dBFS.