Extron electronics XTP T USW 103, Руководство пользователя

Страница: 13 / 46

XTP T USW 103 Switcher • Installation 5
By default, audio input is selected automatically (see Audio input selection SIS
commands on page 19 to manually select audio inputs). When input 2 or 3 is
selected with automatic audio input selections, the switcher prioritizes embedded digital
audio. The table below shows the audio format that is sent over the XTP connection
when a specific audio format is not specified.
Selected
Video Input
HDMI Embedded
Audio Present
Analog Audio
Present
Audio Sent Over XTP
VGA N/A Yes Analog audio
VGA N/A No No audio
HDMI Yes No HDMI embedded audio
HDMI Yes Yes HDMI embedded audio
HDMI No Yes Analog audio
HDMI No No No audio
B
Analog video input connector — Connect a video source to the 15-pin HD
connector, labeled input 1 (see figure 2 ,
B
on the previous page). It accepts RGBHV
video signals.
C
HDMI input connectors — Connect a digital video source device to either or both
female HDMI connectors, labeled inputs 2 and 3 (see figure 2 ,
C
on the previous
page). They accept HDMI, DVI (with an appropriate adapter), or dual mode DisplayPort
video sources.
NOTES:
• For HDMI cables, the maximum cable length is 15 feet (4.6 meters).
•
Use Extron LockIt Cable Lacing Brackets to secure HDMI connectors to the
device (see
HDMI Connection
on page 7).